Zkteco Ua300 Factory Reset =link= Jun 2026

: Go to the Device Management or AC Manage tab.

You need to delete all attendance logs and employee fingerprints/IDs before transferring ownership.

Note: Restoring the factory settings will delete all the user data, please be cautious. www.zkteco.me User Manual - zkteco.me

If the administrator is lost, you can use the located on the back of the device to reset admin privileges. zkteco ua300 factory reset

: Press and hold the M or OK button until the menu screen appears.

Export all user templates, fingerprints, and attendance logs using the ZKTime attendance software.

Select (on some firmware versions, this is labeled as Restore Factory Defaults ). : Go to the Device Management or AC Manage tab

: Download all attendance data and user logs using the ZKTime or BioTime software.

When asked for the ID, enter 8888 (or the default master ID for your firmware version).

Insert a FAT32-formatted into the terminal's USB port. Press M/OK to enter the main menu. Navigate to Data Mgt. (Data Management) > Backup Data . Select (on some firmware versions, this is labeled

If the device firmware is frozen or completely unresponsive, a physical hardware reset is required. Step 1: Remove the Device Backplate Unplug the power cable from the device. Unscrew the UA300 from its wall mount or backplate. Step 2: Locate the Reset Button Look at the back circuit board of the device. Locate a tiny pinhole labeled . Step 3: Trigger the Reset

If you are locked out and cannot access the menu to perform a full factory reset, you must first reset the administrator privileges. Check the Device Time

If you have ZKTECO's software (e.g., ZKTECO Attendance Management Software) installed on your computer, you can perform a factory reset using the following steps: