Satlink Ws-6906 Software Upgrade ((link)) -
Some newer versions of the WS-6906 support updates directly via a USB flash drive.
⚠️ : The SATLINK WS-6906 is often cloned (counterfeit). Upgrading a clone with official firmware will brick the device. Verify authenticity by checking the boot logo and PCB color. If unsure, do not upgrade.
Fix: Check your COM port settings in Device Manager. Ensure you turn on the Satlink meter after clicking start in the software, not before.
: Plug the cable into your PC and the WS-6906. Note: Windows may not show a "New Hardware" pop-up immediately; this is normal. satlink ws-6906 software upgrade
Click the or Next button on the PC software interface. The program will display a status waiting for the device connection. Switch the power button of your Satlink WS-6906 to ON .
Right-click the port, select > Port Settings , and ensure the Bits per second (Baud Rate) is set to 115200 . Step 3: Running the Upgrade Software
Verify that the matches the new version file you just flashed. Some newer versions of the WS-6906 support updates
Open Windows Device Manager, verify the assigned COM port number for your RS-232 adapter, and match it inside the tool settings. Device switched on too early or wrong cable connection.
Do not connect your meter to your computer until you have gathered all necessary components. Using incorrect tools can interrupt the data transfer and brick your device.
: A specialized cable (often a 3.5mm jack to RS-232 or USB-to-RS-232) is required to connect the meter to your PC. PC Software : You will need the SatlinkTools program or a similar update utility designed for the Firmware File firmware file specifically for the Step-by-Step Upgrade Guide Connect the Hardware : With the Satlink WS-6906 , connect it to your PC using the RS-232 cable. Verify authenticity by checking the boot logo and PCB color
If you want, I can draft step-by-step instructions tailored to your operating system (Windows/macOS via virtualization) and include specific button sequences if you tell me the exact current firmware version shown on your meter.
Upgrades often fix known bugs, improving the speed and accuracy of the signal lock.
Wait for the success message. disconnect the cable during this process. Troubleshooting Common Upgrade Errors
Newer user manuals indicate that some versions can be upgraded directly via the USB port by navigating to the "System" or "Upgrade" menu.
