Xrv9k-patched Fullk9-x-7.1.1.qcow2 Download
Inside the directory, rename the image file to virtioa.qcow2 .
Improved support for NETCONF/YANG and APIs.
Set the Network adapters to a minimum of 4 and use virtio-net-pci as the adapter type. Initial Boot Sequence and Troubleshooting Xrv9k-fullk9-x-7.1.1.qcow2 Download
Deploying version 7.1.1 of the XRv9k platform unlocks powerful capabilities engineered for modern network architectures: 1. Advanced Routing and MPLS
Typically requires 4 vCPUs and 16GB of RAM to function efficiently. Downloading the Image Inside the directory, rename the image file to virtioa
Some users have reported issues running XRv9k version 6.0.0+ on AMD processors. In these cases, the Route Processor (RP) and Admin VM come up, but the Line Card (LC) fails to start. This is a known compatibility issue with specific processor families, and it's worth checking community forums for more recent workarounds if you are using an AMD-based server.
Fix permissions on the EVE-NG file system to ensure the hypervisor can launch the file: /opt/unetlab/wrappers/unl_wrapper -a fixpermissions Use code with caution. Importing into GNS3 Open GNS3 and navigate to > QEMU VMs . In these cases, the Route Processor (RP) and
RP/0/RP0/CPU0:ios# configure RP/0/RP0/CPU0:ios(config)# interface MgmtEth0/RP0/CPU0/0 RP/0/RP0/CPU0:ios(config-if)# ipv4 address 192.168.1.10 255.255.255.0 RP/0/RP0/CPU0:ios(config-if)# no shutdown RP/0/RP0/CPU0:ios(config-if)# commit Use code with caution. Important Notices Regarding Downloads and Licensing
The XRv9k is a "heavy" image. Before downloading and booting xrv9k-fullk9-x-7.1.1.qcow2 , ensure your server or workstation meets these minimum specs per instance: 4 (minimum), 8 (recommended for performance).
The Cisco IOS XRv 9000 Router is supported on Linux KVM environments like Ubuntu and Red Hat Enterprise Linux (RHEL). Here's a simplified procedure to install the image using the KVM command line: Download the xrv9k-fullk9-x-7.1.1.qcow2 image and save it in a directory, e.g., /var/lib/libvirt/images/ . Step 2: Use the virt-install command to create and start the VM. An example command might look like:
