Nokia 7250 Ixr — X1 Installation Guide [updated]

: Includes USB, an SD slot with a security cover, and Bluetooth connectivity for wireless management options. Alcatel-Lucent Enterprise Official Documentation Links

using four rack screws (M6 or 10-32, not included). Tighten to 4.5 N·m (40 in-lb).

Attach the lug to the chassis using the grounding screws and connect the other end of the wire to your facility’s primary earth ground. 3. Connecting Power nokia 7250 ixr x1 installation guide

Insert the AC power cord into the appliance inlet on the PSU.

: Plug the power cords into the PSUs and secure them using the retaining clips. The system will typically power on automatically once connected. Step 3: Connectivity and Cabling Management Port : Includes USB, an SD slot with a

For : Plug the standard IEC AC power cord into the PSU inlet, then secure it using the wire retention clip.

Plug the other end into the AC power outlet and switch the breaker on. Connecting DC Power Turn off the external DC circuit breaker and lock it out. Remove the plastic terminal block cover from the DC PSU. Connect the negative line wire to the terminal slot. Connect the positive return wire to the RTN terminal slot. Attach the lug to the chassis using the

Below is a guide for the installation and initial setup of the Nokia 7250 IXR-X1 Pre-Installation Checklist